FB Live Recap: Kindest Gnomes Ideas

 

I made a quick Facebook Live video this week to show a few alternate ideas for the Kindest Gnomes bundle. This bundle is in the new holiday mini-catalog, and I think it’s geared a little more toward Christmas cards. Since I love the cute gnomes, I wanted to use them for more than just Christmas. I paired the set with the pumpkins from the Hello Harvest set as well as the DSP from both sets and also the free Saleabration Rings of Love DSP.

Since the Gnomes Dies crop some of the gnomes and mushroom houses from the DSP, it’s very quick and easy to make cute gnome cards/projects. Add flowers or pumpkins and you have seasonal cards as well.

 

For this card, I layered a 5 1/4″ x 4″ piece of DSP from the Ring of Love package onto a card base of Parakeet Party cut at 11″ x 4 1/4″, scored at 5 1/2″.

I stamped the flower arrangement and the small flower from the Hello Harvest stamp set twice with Memento ink and colored them with Stampin’ Blends markers. I saved one of the small flowers to put by the gnome’s hand and glued the rest to the card front.

Using the dies from the Gnomes Dies, I cropped one of the mushroom houses and the gnome with the braided hair from the Storybook Gnomes DSP, gluing the house to the card front and adding the gnome with dimensionals.

For a little more interest, I added a small dragonfly punched from Tahitian Tide DSP and topped it with a Glossy Dot.

The inside is a 5 1/4″ x 4″ piece of Basic White cardstock on which I stamped a small flower and added a sentiment. I colored the flower to match the flowers on the front. Also stamped and colored a small flower on the envelope.

 

 

For this Fall card, I layered a 5 3/8″ x 4 1/8″ piece of Mossy Meadow cardstock onto a card base of Very Vanilla cut at 8 1/2″ x 5 1/2″, scored 4 1/4″, then I added a 5 1/4″ x 4″ piece of DSP from the Ring of Love package.

I used Pumpkin Pie cardstock to crop the pumpkin pieces using the Rustic Pumpkin Dies. Using Mossy Meadow cardstock, I cropped the stems and vines from the same die set. I attached these to the card front, one with glue, one with dimensionals.

For the gnome, I used Rustic Harvest DSP to crop the hat and body/shoes and Very Vanilla for the beard. I added a nose cropped from Petal Pink cardstock, then attached the gnome to the card front with dimensionals.

The “Hello” greeting is from the Hello Harvest stamp set and stamped with Mossy Meadow meadow, then cropped with the die from the Stylish Shapes die set and attached to the card front with dimensionals.

For the inside of this card, I used three of the small vines from the Rustic Pumpkin die set cropped from Mossy Meadow cardstock, and glued them to the left edge of a 5 1/4″ x 4″ piece of Very Vanilla cardstock. I layered this onto a 5 3/8″ x 4 1/8″ piece of Mossy Meadow cardstock then attached to the inside of the card.

 

 

This card uses a 5 1/4″ x 4″ piece of Sunprints DSP layered onto a card base of Mossy Meadow cardstock that is 8 1/2″ x 5 1/2″, scored at 4 1/4.”

I fussy cut a few of the leaves and a small pumpkin from the Rustic Harvest DSP and I again cropped a gnome and mushroom house from the Storybook Gnomes DSP. I attached the mushroom house and pumpkin to the card front, then added the gnome with dimensionals.

I stamped the greeting from the Hello Harvest stamp set with Memento ink and cropped it with the coordinating die, then attached it to the card front with dimensionals. I tucked the leaves I had fussy cut under the greeting and glued them in place.

For the inside of the card, I added a leaf from the Hello Harvest stamp set stamped with Mossy Meadow ink onto the lower-left corner of a 5 1/4″ x 4″ piece of Basic White cardstock, and stamped a sentiment with Memento ink, then attached it to the inside of the card. I also stamped a leaf onto the lower-left corner of the envelope.

The Kindest Gnomes Bundle, the Hello Harvest Bundle, and the coordinating DSPs will be available for purchase beginning in July. Here is a list of the other products I used for these cards:

 

Product List

FB Live Recap: True Beauty Cards

 

The True Beauty bundle is another new bundle in the annual catalog that comes with several beautiful floral images and sentiments. The coordinating dies cut all the flowers as well as having a couple of “sprigs” dies for embellishments, and there is a lovely background die that is perfect for so many designs.

In my video this week, I made a card showing the background die with all of the flowers in Fresh Freesia as well as a card using several different colors for the flowers. If you missed the live presentation, you can watch the replay here.

I’ve listed the cardstock requirements for these cards below. If you’d like to purchase any of them You can shop with me here. Thank you for your continued support and for viewing the video!

 

Cardstock needed for the Fresh Freesia card:
  • Card Base: Fresh Freesia – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Basic White 4 7/8″ x 3 5/8″
  • Second Layer: Fresh Freesia: 4 3/4″ x 3 1/2″, embossed with the Hive 3D folder
  • Stamped Layer: Basic White – 4″ x 2 3/4″
  • Sprigs: Scraps of Soft Seafoam and Gold Foil
  • Flower: Scrap of Basic White
  • Inside Layer: Basic White – 5 1/4″ x 4″

 

Cardstock needed for the Soft Seafoam Card:
  • Card Base: Basic White – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Soft Seafoam – 5 3/8″ x 4 1/8″
  • Trellis Die Cut Layer: Gold Foil – 5 3/8″ x 4 1/8″
  • Flowers, Leaves and Greeting: Scraps of Basic White
  • Sprigs: Scraps of Granny Apple Green
  • Inside Layers: Soft Seafoam – 5 3/8″ x 4 1/8″ and Basic White – 5 1/4″ x 4″

Product List

FB Live Recap: Potted Geraniums

 

Last week when I worked with the Wisteria Wishes bundle, I thought it was such a fun product to work with — and it is. This week, I pulled out the Potted Geraniums bundle and wow! Another really fun set to use! The first color I think of with geraniums is bright red, but of course, there are many different shades of reds and pinks with geraniums.

For my Facebook Live video this week, I chose Melon Mambo and Flirty Flamingo for my flower colors. I know I’ll be using this set a lot, not only because of the beautiful floral images, but because it also has several nice sentiments. Be sure to check back on my blog and Pinterest page for more ideas using this set.

If you missed the live presentation, you can watch the replay here.

 

Cardstock requirements for these cards are as follows:

For the easel card:

  • Card Base: Melon Mambo – 11″ x 4 1/4″, score at 5 1/2″ and 2 3/4″
  • Easel Layer Base: Melon Mambo – 5 1/2″ x 4 1/4″
  • First Layer: Basic White – 5 3/8″ x 4 1/8″, emboss with Painted Texture embossing folder
  • Second Layer: Melon Mambo – 4 1/8″ x 3 1/8″
  • Third Layer: Basic White – 4″ x 3″, emboss with Painted Texture embossing folder
  • Flower Pot: Scrap of Crumb Cake
  • Leaves: Scrap of Soft Seafoam
  • Flowers and Sign: Scraps of Basic White
  • Inside: Basic White 5 3/8″ x 4 1/8″
  • Inside Strip Layers: Melon Mambo – 3 3/4″ x 1 3/8″; Basic White – 3 5/8″ x 1 1/4″; Melon Mambo – 3 1/2″ x 1 1/8″; Basic White – 4″ x 1 1/2″ stamped and cropped with Stylish Shapes die

For the pink geraniums card:

  • Card Base: Flirty Flamingo – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Basic White – 5 1/4″ x 4″, cut two
  • Flower Pot: Scrap of Crumb Cake
  • Flowers, Leaves and Sign: Scraps of Basic White

 

Here’s the list of products I used for these cards. You can shop with me here if you’d like to purchase any of them. As always, I’m grateful for your support.

 

Product List

Red Hot Pokers!

 

The Wisteria Wishes bundle makes gorgeous wisteria flowers to decorate your cards and projects. I made a couple of cards on my Facebook Live video earlier this week showing how to use the dies or the stamped images to do just that. If you missed the video presentation, you can watch the replay here.

Today, I want to show you another idea for using this set. I remember my mom used to have some of these flowers called Red Hot Pokers in her yard and they were so striking. The bright red color and the tall spikes of flowers just stood out among the other flowers.

You can use the Wisteria Wishes bundle to recreate the look of the Red Hot Pokers for your cards and they are just as striking:

  • Card Base: Real Red – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • For the background layer, cut a piece of Basic White at 5 3/8″ x 4 1/8″. Use Smoky Slate ink with the words background stamp from the Quiet Meadow stamp set and stamp several times on the cardstock; be sure to stamp off once or twice before stamping on the cardstock so that the image is very light. Adhere to the card front.
  • Use Garden Green ink to stamp the leaves/stems three times onto a scrap of Basic White cardstock, then crop with the corresponding die. Cut apart one of the sets of stems.
  • Using Pumpkin Pie ink, stamp the triple flower image three times onto a scrap of basic White cardstock. Use Real Red ink and the single flower image to stamp over each of the orange flowers. You may want to stamp over each flower two or three times depending on how deep you want the color. Crop the flowers with the corresponding die. Snip apart one of the sets of flowers.
  • Arrange the flowers and stems onto your card front. For my sample, I glued two of the stems and flowers directly onto the card front up a little higher, then added the other two sets of stems and flowers to the card front with dimensionals a little bit lower than the other flowers. Refer to photo for placement.
  • Stamp the greeting from the Go To Greeting stamp set onto a scrap of Basic White cardstock using Memento ink. Crop with the small die from the Stylish Shapes die set and attach to the card front with dimensionals. Refer to photo for placement.
  • Place a small Matte Black Dot on the upper left corner of the card front.

 

  • For the inside of the card, layer a piece of Real Red cardstock that has been cut to 5 3/8″ x 4 1/8″.
  • Cut a piece of Basic White cardstock and stamp with a greeting of your choice with Memento ink. For my sample, I used a greeting from the Go To Greetings stamp set.
  • Use Garden Green ink to stamp the two right stems/leaves to the lower left corner. Stamp the flowers as you did for the front using Pumpkin Pie and Real Red ink. Refer to photo for placement.
  • Adhere the completed piece to the inside of the card.

 

  • Stamp the far right leaves/stem and flowers on the lower left corner of the envelope as you did for the inside of the card.

 

I’ve listed the products I used for this card below. If you would like to purchase any of them, you can shop with me here. Thank you for your support and happy crafting!

 

Product List

FB Live Recap: 2 Ways with Wisteria Wishes

 

The Wisteria Wishes Bundle is one set that I knew I just “had to have” when I saw it! I actually have a small wisteria tree growing in front of a half-wall at the end of my driveway. I love the graceful flowers, the lacy leaves, and the gorgeous color of the flowers.

For my Facebook Live video this week, I used this bundle and discovered that it’s really versatile. If you missed the video, you can watch the replay here. Be sure to check back on my website this weekend where I will be posting directions for another idea using this bundle!

 

For the card with the die-cut flowers, you will need the following cardstock:
  • Card Base: Gorgeous Grape – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer (front): Shimmery White – 5 3/8″ x 4 1/8″, embossed with the Brick and Mortar 3D embossing folder
  • First Layer (inside): Basic White – 5 3/8″ x 4 1/8″
  • Leaves: Scraps of Basic White and Granny Apple Green
  • Flowers: Scraps of Gorgeous Grape, Highland Heather and Fresh Freesia
  • Branch: Scrap of Soft Suede

 

Here are the cardstock requirements for the card with the stamped flowers:
  • Card Base: Mossy Meadow – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer (front): New Horizons DSP – 5 1/4″ x 4″
  • First Layer (inside): Basic White – 5 1/4″ x 4″
  • Leaves: Scraps of Granny Apple Green and basic White
  • Flowers and Greeting: Scraps of Basic White

 

The products I used for these cards are listed below. Please keep in mind that the New Horizons DSP is in the current mini-catalog which retires the end of May.

Should you wish to purchase any of these products, you can shop with me here. As always, thank you for choosing me as your Stampin’Up! demonstrator!

 

Product List

FB Live Recap: Hues of Happiness Fun-Fold Card

 

For my video this week, I made a fun-fold card that is easy to make but has a big “wow” factor. Another great thing about it is that you can use up many of your DSP scraps! For my project, I used several of the papers from the Hues of Happiness pack.

If you missed the live presentation, you can watch the replay here. Join me each Tuesday at 2 p.m. ET for a video where I demonstrate a project or two for you.

 

Here are the cardstock requirements to make this fun-fold card:
  • Card Base: Granny Apple Green – 10 1/2″ x 5 1/2″, score at 1 3/4″, 3 1/2″, 7″ &  8 3/4″, Turn to short side and cut between the first and last score marks at 1 1/2″ & 4″
  • Note – for each of the DSP sections, use a different pattern of DSP
  • Two End Long Panels: DSP – 5 1/4″ x 1 1/2″
  • Four Small Panels: DSP – 1 1/2″ x 1 1/4″
  • Middle Panels Between the Small Panels: DSP – 2 1/4″ x 1 1/2″
  • Middle Section: DSP – cut one at 3 1/4″ x 2 1/4″ & two at 2 1/4″ x 1 1/2″
  • Layers for Stamped Images: Granny Apple Green – 3 1/2″ x 2 1/4″ and 3″ x 2″
  • Stamped Images: Basic White – 3 1/4″ x 2″ and 2 3/4″ x 1 3/4″

 

Here’s the same card with Daffodil Delight as the card base instead of Granny Apple Green. Which do you prefer?

 

 

Product List

FB Live Recap: Happiness Abounds – Again!

 

So last week on my video, I used the Happiness Abounds bundle. I loved it so much, I used it again this week!  The Hues of Happiness DSP makes it so easy to make a gorgeous card, and there are lots of color variations to choose from.

You can watch the reply here if you missed the live presentation. Join me each Tuesday at 2 p.m. ET where I demonstrate projects using the latest Stampin’Up! products.

 

For the yellow card, you will need the following cardstock:
  • Card Base: Daffodil Delight  8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer (front): Basic White – 5 1/8″ x 3 7/8″
  • First Layer (inside): Basic Black – 5 1/8″ x 3 7/8″
  • Second Layer (front): Daffodil Delight  – 5″ x 3 3/4″, emboss with the Hive 3D folder
  • Second Layer (inside): Basic White – 5″ x 3 3/4″
  • Third Layer: Basic Black – 4 1/8″ x 2 7/8″
  • Fourth Layer: Perfectly Penciled DSP – 4″ x 2 3/4″
  • Flowers and Leaves: Hues of Happiness DSP
  • Greeting: Basic White – 4″ x 2″
  • Bees: Scraps of Basic White

 

For the blue card you will need the following cardstock:
  • Card Base: Coastal Cabana – 11″ x 4 1/4″, score at 5 1/2″
  • First Layer: Basic White – 5 1/4″ x 4″, cut two
  • Second Layer: Coastal Cabana – 4 3/4″ x 3 1/2″
  • Third Layer: Basic White – 4″ x 2 5/8″
  • Flowers and Leaves: Hues of Happiness DSP

 

Here is the list of products I used for these cards. Please shop with me here if you need these or any other products. Thank you for your support!

 

Product List

FB Live Recap: Happiness Abounds

 

The new annual catalog is live! I used one of my favorite new bundles from the new catalog for my Facebook Live video this week. The Happiness Abound bundle has beautiful images to color and die cut — and the dies also match some of the flowers and leaves on the coordinating Designer Series Paper called Hues of Happiness. If you don’t have the time to stamp and color, just use the dies on the DSP and create your design with the die cuts!

If you missed the live presentation, you can watch the replay here.

 

Here are the cardstock requirements for the cards I made:

 

For the Three Flower Card :

  • Card Base: Melon Mambo – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Basic White – 5 1/4″ x 4″, cut two
  • Flowers and Leaves: Scraps of Basic White
  • Greeting: Melon Mambo – 3 3/4″ x 1 1/4″; Basic White – 3 1/4″ x 1″

 

For the Fun-fold Card: 

  • Card Base: Melon Mambo – 11″ x 4 1/4″, score at 5 1/2″ and 2 3.4″
  • First Layers: Basic White 4 1/8″ x 2 5/8″ and 5 3/8″ x 4 1/8″
  • Second Layers: Hues of Happiness DSP – 4″ x 2 1/2″ and 5 1/4″ x 4″
  • Third Layers: Basic White – 6″ x 3″, crop two large stitched squares
  • Flowers and Leaves: Hues of Happiness DSP – crop several flowers and leaves from the paper using the coordinating dies.

 

The products I used for these cards are listed below. If you need any of them or any other products, you can shop with me using this link. Thank you for your support!

Product List

FB Live Recap: Wild & Sweet with New In-Colors

 

I love the images of these beautiful creatures in the Wild & Sweet stamp set! I used all three images in my Facebook Live presentation this week, as well as three of the new In-Colors. The images are so detailed that all you need is a little splash of color to really make them pop. If you missed the live presentation, you can watch the replay here.

 

Here are the cardstock requirements for the cards:

Koala card:

  • Card Base: Parakeet Party – 11″ x 4 1/4″, score at 5 1/2″
  • First Layer: Basic White – 5 3/8″ x 4 1/8″, cut two
  • Stamped Koala:– Basic White – 4″ x 2 1/2″
  • Leaves: Scraps of Basic White

Raccoon card:

  • Card Base: Starry Sky – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Basic White – 5 3/8″ x 4 1/8″, cut two
  • Second Layer: Sun Prints DSP – 5 1/4″ x 4″
  • Stamped Raccoon: Basic White – 4 1/4″ x 3″
  • Leaf Spray: Scrap of Basic White

Panda card: 

  • Card Base: Tahitian Tide: 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Basic White – 5 3/8″ x 4 1/8″, cut two
  • Stamped Panda: Basic White – 4 3/4″ x 3 1/2″
  • Leaf Sprays: Scraps of Parakeet Party and Tahitian Tide

 

In addition to the product supply list below, you will need the following items for these cards, which I am not able to add to the product list until May 3rd:

  • Wild & Sweet stamp set – # 158775
  • Nature’s Print stamp set – # 158793
  • Parakeet Party Cardstock – # 159259
  • Tahitian Tide Cardstock – # 159261
  • Starry Sky Cardstock – # 159263
  • SunPrints DSP – # 158790
  • Starry Sky Stampin’ Pad – # 159212
  • Tahitian Tide Stampin’ Pad – # 159210
  • Parakeet Party Stampin’ Pad – # 159208
  • Parakeet Party Stampin’ Blends – # 159220

 

Product List

FB Live Recap: Nature’s Prints

 

The soon-to-be-released Nature’s Prints Bundle was the focus of my Facebook Live video this week. I challenged myself to use my least favorite new In-Color, Parakeet Party, but it quickly became one of my favorite colors! The Nature’s Print bundle reminds me of the Forever Fern bundle in that it has many different foliage images and dies which you can use to build a variety of pretty arrangements. If you missed the live presentation, you can watch the replay here.

 

For the foliage wreath card, you will need the following:
  • Card Base: Parakeet Party – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First layer: Basic White – 5 1/4″ x 4″, cut two
  • Wreath: Parakeet Party – 4 1/2″ x 4 1/4″
  • Greeting: Basic White – 3″ x 1 3/4″
  • Inside Strip: Parakeet Party – 5 1/2″ x 1/2″

 

For the green foliage card:
  • Card Base: Parakeet Party – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Basic White – 5 1/4′ x 4″, cut two
  • Second Layer: Parakeet Party – 4″ x 2″
  • Third Layer: Parakeet Party In-color DSP – 3 7/8″ x 1 7/8″
  • Foliage: Scraps of Basic White and Parakeet Party
  • Greeting: Basic White – 2″ x 1 1/2″
  • Inside Strips: Parakeet Party – 5 1/2″ x 1/2″; Parakeet Party In-color DSP – 5 1/2″ x 3/8″

 

For the multicolor foliage card:
  • Card Base: Parakeet Party – 8 1/2″ x 5 1/2″, score at 4 1/4″
  • First Layer: Basic White – 5 3/8″ x 4 1/8, cut two
  • Foliage: Scraps of Basic White and Parakeet Party
  • Greeting: Basic White – 3″ x 1 3/4″

 

In addition to the Product List below, here are the new products used for these cards. I am not able to include them in the Product List until they become available on May 3rd.

  • Nature’s Prints Bundle – # 158801
  • Fern 3D Embossing Folder – #158804
  • Parakeet Party Cardstock – #159259
  • Parakeet Party Classic Stampin’ Pad  – #159208
  • Tahitian Tide Classic Stampin’ Pad – #159210
  • Starry Sky Classic Stampin’ Pad – #159212

 

Product List